RA10 Shower Saver by the Czech company Watersavers ensures water and energy savings needed for heating in the range of 22-67%. If you leave it in the default setting, which means a flow rate of 6 liters per minute, you will hardly notice any difference compared to your original, non-saving showerhead, while maintaining high showering comfort and washing efficiency.

• With one saver, a typical four-member family can save on average over 20,000 liters of water per year, energy for heating it, and at least 3,300 CZK (or more).
• The investment pays off within 1-3 months – and then you just keep saving.
• The lifespan of Watersavers products is designed for 20 years, saving you a lot of money. Watersavers is a purely Czech company that manufactures its products in the Czech Republic, thus providing jobs for Czech people.
• Water is the essence of life, extremely valuable and increasingly scarce for people. It's worth saving not only from an economic perspective.

Instructions:

• The package includes silicone O-rings that differ in color and thickness.
• Depending on the water flow you need, insert the necessary rings into the saver.
• Simply disassemble the saver, push out the set black thick ring using a pointed tool, and replace it with the rings according to your needs.

Flow rate settings:

4 l/min – 2x thicker black O-ring

6 l/min – 1x thicker black O-ring

8 l/min – 1x red O-ring

10 l/min – 2x thin black O-ring

12 l/min – 1x thin black O-ring

14 l/min – after removing all O-rings

Additional Info:

Minimum pressure: 1 bar

Water flow: 4 - 14 l per minute

Thread type: 1/2"

Country of origin: Czech Republic

Guaranteed flow at pressure: 6 bars